View 74LVC1G041010_4971844.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74LVC1G04
SINGLE INVERTER GATE
Description
The 74LVC1G04 is a single inverter gate with a standard totem pole output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the
Pin Assignments
(Top View) NC A
1 2 4 5
Vcc
GND 3
Y
NEW PRODUCT
output preventing damaging current backflow when the device is powered down. The gate performs the positive Boolean function:
SOT25 / SOT353
(Top View) NC A GND
1 6
Y=A Features
* * * * * * Wide Supply Voltage Range from 1.65 to 5.5V 24mA Output Drive at 3.3V CMOS low power consumption IOFF Supports Partial-Power-Down Mode Operation Inputs accept up to 5.5V ESD Protection Tested per JESD 22 Exceeds 200-V Machine Model (A115-A) Exceeds 2000-V Human Body Model (A114-A) * * * * * Latch-Up Exceeds 100mA per JESD 78, Class II Range of Package Options Direct Interface with TTL Levels SOT25, SOT353, and DFN1410: Assembled with "Green" Molding Compound (no Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) * * * *
Vcc NC Y
2
5
3
4
DFN1410 (Note 2)
Applications
Voltage Level Shifting General Purpose Logic Power Down Signal Isolation Wide array of products such as. o PCs, networking, notebooks, netbooks, PDAs o Computer peripherals, hard drives, CD/DVD ROM o TV, DVD, DVR, set top box o Cell Phones, Personal Navigation / GPS o MP3 players ,Cameras, Video Recorders
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Pin 2 and pin 5 of the DFN1410 package are internally connected.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
1 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Pin Descriptions
Pin Name NC A GND Y Vcc Data Input Ground Data Output Supply Voltage Description No Connection
NEW PRODUCT
Logic Diagram
A
2
4
Y
Function Table
Inputs A H L Output Y L H
74LVC1G04
Document number: DS32198 Rev. 2 - 2
2 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Absolute Maximum Ratings (Note 3)
Symbol ESD HBM ESD MM VCC VI Vo Vo IIK IOK IO TJ TSTG
Notes:
Description Human Body Model ESD Protection Machine Model ESD Protection Supply Voltage Range Input Voltage Range Voltage applied to output in high impedance or IOFF state Voltage applied to output in high or low state. Input Clamp Current VI<0 Output Clamp Current Continuous output current Continuous current through Vdd or GND Operating Junction Temperature Storage Temperature
Rating 2 200 -0.5 to 6.5 -0.5 to 6.5 -0.5 to 6.5 -0.3 to VCC +0.5 -50 -50 50 100 -40 to 150 -65 to 150
Unit KV V V V V V mA mA mA mA C C
NEW PRODUCT
3. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
3 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Recommended Operating Conditions (Note 4)
Symbol VCC Operating Voltage Parameter Operating Data retention only VCC = 1.65 V to 1.95 V VIH High-level Input Voltage VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VCC = 1.65 V to 1.95 V VIL Low-level input voltage VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VI VO Input Voltage Output Voltage VCC = 1.65 V VCC = 2.3 V IOH High-level output current VCC = 3 V VCC = 4.5 V VCC = 1.65 V VCC = 2.3 V IOL Low-level output current VCC = 3 V VCC = 4.5 V t/V VCC = 1.8 V 0.15V, 2.5 V 0.2 V Input transition rise or fall VCC = 3.3 V 0.3 V rate VCC = 5 V 0.5 V Operating free-air temperature 0 0 Min 1.65 1.5 0.65 X VCC 1.7 2 0.7 X VCC 0.35 X VCC 0.7 0.8 0.3 X VCC 5.5 VCC -4 -8 -16 -24 -32 4 8 16 24 32 20 10 5 -40 85 C ns/V mA mA V V V V Max 5.5 Unit V V
NEW PRODUCT
TA
Notes:
4. Unused inputs should be held at Vcc or Ground.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
4 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25C)
Over recommended free-air temperature range (unless otherwise noted) Symbol Parameter Test Conditions IOH = -100A IOH = -4mA VOH High Level Output Voltage IOH = -8mA IOH = -16mA IOH = -24mA IOH = -32mA IOL = 100A IOL = 4mA VOL High-level Input Voltage IOL = 8mA IOL = 16mA IOL = 24mA IOL = 32mA II IOFF ICC ICC Ci JA Input Current VI = 5.5 V or GND Power Down Leakage VI or VO = 5.5V Current Supply Current Additional Supply Current Input Capacitance Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case VI = 5.5V of GND IO=0 1.65V 2.3V 3V 4.5V 1.65V to 5.5V 1.65V 2.3V 3V 4.5V 0 to 5.5V 0 1.65V to 5.5V Vcc 1.65V to 5.5V Min VCC - 0.1 1.2 1.9 2.4 2.3 3.8 0.1 0.45 0.3 0.4 0.55 0.55 5 10 10 500 4 204 371 430 52 143 190
o o
Typ.
Max
Unit
V
NEW PRODUCT
V
A A A A pF C/W C/W o C/W o C/W o C/W o C/W
Input at VCC -0.6 V 3 V to 5.5V Vi = VCC - or GND SOT25 SOT353 DFN1410 SOT25 SOT353 DFN1410 3.3 (Note 5) (Note 5) (Note 5) (Note 5) (Note 5) (Note 5)
JC
Notes:
5. Test condition for SOT25, SOT353, and DFN1410: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
5 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Switching Characteristics
Over recommended free-air temperature range, CL = 15pF (see Figure 1) Vcc = 1.8 V Vcc = 2.5 V From TO 0.15V 0.2V Parameter (Input) (OUTPUT) Min Max Min Max tpd A Y 2.0 6.4 1.0 4.2
Vcc = 3.3 V 0.3V Min Max 0.7 3.3
Vcc = 5 V 0.5V Min Max 0.7 3.1
Unit ns
NEW PRODUCT
Over recommended free-air temperature range, CL = 30 or 50pF as noted (see Figure 2) Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V From TO 0.15V 0.2V 0.3V Parameter (Input) (OUTPUT) Min Max Min Max Min Max tpd A Y 3.0 7.5 1.4 5.2 1.0 4.2
Vcc = 5 V 0.5V Min Max 1.0 3.7
Unit ns
Operating Characteristics
TA = 25 C Parameter Power dissipation capacitance Test Conditions f = 10 MHz Vcc = 1.8 V TYP 16 Vcc = 2.5 V TYP 18 Vcc = 3.3 V TYP 18 Vcc = 5 V TYP 20 pF Unit
Cpd
74LVC1G04
Document number: DS32198 Rev. 2 - 2
6 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Parameter Measurement Information
NEW PRODUCT
Vcc 1.8V0.15V 2.5V0.2V 3.3V0.3V 5V0.5V VI VCC VCC 3V VCC
Inputs tr/tf 2ns 2ns 2.5ns 2.5ns
VM VCC/2 VCC/2 1.5V VCC/2
CL 15pF 15pF 15pF 15pF
RL 1M 1M 1M 1M
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms
Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate 10 MHz. C. tPLH and tPHL are the same as tPD.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
7 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Parameter Measurement Information (Continued)
NEW PRODUCT
Vcc 1.8V0.15V 2.5V0.2V 3.3V0.3V 5V0.5V VI VCC VCC 3V VCC
Inputs tr/tf 2ns 2ns 2.5ns 2.5ns
VM VCC/2 VCC/2 1.5V VCC/2
CL 30pF 30pF 50pF 50pF
RL 1K 500 500 500
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 2. Load Circuit and Voltage Waveforms
Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate 10 MHz. C. tPLH and tPHL are the same as tPD.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
8 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Ordering Information
74LVC1G 04 XXX - 7
Logic Device
74 : Logic Prefix LVC : 1.65 to 5.5V Family 1G : One gate
Function
04 : 1-Input Inverter Gate
Package
W5 : SOT25 SE : SOT353 FZ4 : DFN1410
Packing
7 : Tape & Reel
NEW PRODUCT
Device 74LVC1G04W5-7 74LVC1G04SE-7 74LVC1G04 FZ4-7
Notes:
Package Code W5 SE FZ4
Packaging (Note 6) SOT25 SOT353 DFN1410
7" Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 5000/Tape & Reel -7
6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
74LVC1G04
Document number: DS32198 Rev. 2 - 2
9 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Marking Information
(1) SOT25 and SOT353
(Top View)
5
4
7
XX Y W X
NEW PRODUCT
1
2
3
XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code
Package SOT25 SOT353 Identification Code UU UU
Part Number 74LVC1G04W5 74LVC1G04SE
(2) DFN1410
(Top View) XX YWX XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code
Package DFN1410 Identification Code UU
Part Number 74LVC1G04FZ4
74LVC1G04
Document number: DS32198 Rev. 2 - 2
10 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Package Outline Dimensions (All Dimensions in mm)
(1) Package Type: SOT25
NEW PRODUCT
(2) Package Type: SOT353
6x-0.42 0.10/0.30
C L
C L
1.3
C L
1.15/1.35
2.0/2.2
2x-0.65 6x-0.60
C L
1.9
0.40/0.45
0.65Bsc.
C L
1.10Max.
0.9/1.0
Detail"A" 0.1/0.22
"A"
0/0.1
1.8/2.2
74LVC1G04
Document number: DS32198 Rev. 2 - 2
11 of 14 www.diodes.com
0/8
0.25/0.40
0.25
PIN 1
Land Pattern Recommendation (unit:mm) Top View
Gauge Plane
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Package Outline Dimensions (Continued)
(3) Package Type: DFN1410
0.13Typ.
0.10 C
6x-
0.40Max.
0/0.05
0.08 C
Seating Plane 0.25 A 6x-0.35
Side View
C 6x-0.25
NEW PRODUCT
2X-
A
0.50Typ. B 6x-0.25/0.35 0.075 0.030 O
0.550 4x-0.50Typ. Land Pattern Recommendation (mm)
1.35/1.45
0.95/1.05
(Pin #1 ID)
X 45 . 1x C0
Top View
2X-
0.25 B 0.10(4x) 6x-0.15/0.25 0.10 CAB
Bottom View
74LVC1G04
Document number: DS32198 Rev. 2 - 2
12 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE Taping Orientation (Note 7)
For DFN14106
NEW PRODUCT
Notes:
7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
74LVC1G04
Document number: DS32198 Rev. 2 - 2
13 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.
NEW PRODUCT
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com
74LVC1G04
Document number: DS32198 Rev. 2 - 2
14 of 14 www.diodes.com
October 2010
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of 74LVC1G041010

	To Download 74LVC1G041010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .